Cement Testing Equipment

Product Details:

Globetrek moulds are made of high quality metal and are strong enough to resist distortion and retain their shape and size under rugged conditions. These moulds are given internal surface finish of a very high order, to comply with requirements laid down in IS:10080 & IS:10086.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Ref. Standards : IS: 1727, 4031, 4825

To determine the fineness of cement, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the instrument described below, air permeability method is used to determine the specific surface as a total surface area in cm2/g of material. Air Permeability Apparatus (Blaine Type) is with ISI Certification Mark, IS:5516

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100/ Week
• Delivery Time: Ready Stock
• Packaging Details: Corrugated Box

Product Details:

We are manufacturer supplier of Mortar Mixer . It is used for mixing cement pastes, mortars and pozzolanas.

Additional Information:

• Item Code: CTE-18
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This is used for compacting concrete into cube moulds. This rod is made of steel. It is 16mm diameter, 60mm in length and rounded or bullet shaped at one end.

Product Details:

Ref. Standard-IS:4031 , IS:10080, EN 196-1 413-2, EN 13454-2

 

A specially designed Vibration Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute, as per specifications. The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the cube and mould, is either at the centre of the eccentric shaft or within 25mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds.

Additional Information:

• Item Code: CTE-12
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Vicat Apparatus is for determining the normal consistency, standard consistency and time of setting of cement and lime in accordance with IS, ASTM, BS and AASHTO specifications. The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications.

Additional Information:

• Item Code: CT-05
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: Ready Stock

Product Details:

GlobeTrek Engineering Corporation is a trusted Manufacturer, Supplier & Exporter of Civil Engineering & Scientific Laboratory Equipment. We offer pycometer . Cone made up of brass . 

Product Details:

It is used for the determination of soundness by expansion method of ordinary and rapid hardening portland cement, low heat portland cement and class A lines.

Specifications : It consists of a small split cylinder forming a mould. On either side of the split cylinder, two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.

Additional Information:

• Item Code: CT-03
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Globetrek Cement Water Permeability Apparatus, as per IS: 1727, 2645. Permeability test on pozzolona cement mortar and cement mortar with or without the addition of integral water proofing compound is carried out using a Brass cell of 100mm dia and 50mm high. Each cell with a collar is clamped in between a base plate and top plate with the help of tension rods & nuts. The top plate is provided with an inlet and air release vent and the base plate is provided with an outlet. Six Cell Model without air compressor.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Used for the determination of linear shrinkage of cement mortar. Manufactured from steel with hardness over 200 HV. All surfaces are grinded and all parts are marked with an identification number for a correct assembling. 

Product Details:

Globetrek Engineering Corporation is manufacturer, supplier exporters of Laboratory Cement Autoclave.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Used to determine the specific gravity of hydraulic cement and lime. Glass flask 250 ml capacity, with graduated neck from 0 to 1 ml and from 18 to 24 ml in 0.1 ml graduation with accuracy of 0.05 ml.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Microprocessor Flame Photometer (2F) with Sodium (Na) & Potassium (K) filters, up to 5 point calibration, direct readout in ppm & meq/l, auto filter selection, auto ignition, 20x4 line LCD display, Single Aspiration, RS232 interface PC software at extra cost, printer attachment facility supplied with compressor and other accessories for lab & medical use.

Additional Information:

• Item Code: FPM-02
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: JNPT Port
• Production Capacity: 100 per month
• Delivery Time: 3-4 weeks
• Packaging Details: wooden packing

Product Details:

We are manufacturer supplier of Curing Tank from Mumbai, India.We are manufacturer supplier of Torsion Testing Machine. Suitable for Torsion and Twist test on various metal rods and flats. Torque Measurement by pendulum dynamo meter system. Auto torque selector to adjust torque ranges.

Additional Information:

• Item Code: CTE-13

Product Details:

Laboratory Ball Mill is primarily designed for grinding pigments. The material is ground at a specific speed by using a specific quantity of grinding media (steel balls) for a specific period. The equipment is used for making the ground cement samples in the laboratory. Apart from the cement industry, it is also used in the paint, plastic, granite and tile industries. The equipment is provided with a revolution counter for recording the revolutions.

Product Details:

Product DescriptionOne of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The ofite sand content kit determines the volume percent of sand-sized particles in the drilling fluid. Api defines sand-sized particles as any material larger than 74 µm (200-mesh) in size. The test can be performed on low solids fluids as well as on weighted fluids. The kit consists of a glass tube graduated to read percent (%) by volume, a funnel, and a 200-mesh sieve contained in a cylindrical shaped holder. Consists of sand content kit, complete, with sieve, funnel, graduated tube, wash bottle & carrying case.

Features:

• Api Defines Sand-Sized Particles As Any Material Larger Than 74 µm (200-Mesh) In Size
• The Kit Consists Of A Glass Tube Graduated To Read Percent (%) By Volume, A Funnel, and A 200-Mesh Sieve Contained In A Cylindrical Shaped Holder