Oil & Petroleum Testing Equipments

Product Details:

This type of cup has been in popular use for many years and confirms to IS 3944-1965 specifications. These are available in following sizes. Jet No. B-1, B-2, B-3, B-4, B-5 & B-6.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 500/Month
• Delivery Time: 2-3 week
• Packaging Details: corrugated Box

Product Details:

Features

1. Pensky marten flash point apparatus includes oil test jet device electrical heating with energy regulator fitted with motorised F.H.P. electrical Stirrer with stand & digital indicator.
2. This apparatus is made as per IP 34, ASTMD-93
3. The apparatus consists of brass test cup with handle removable cup cover with spring operated rotating Shutter having piolet jet, stirrer with flexible shaft.
4. The Assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated handle and locking arrangement near Cup flange.
5. The assembly is kept on round shape electric heater with temperature regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits.

Basic and Semi automatic models also available .

Additional Information:

• Item Code: GT-125
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: JNPT
• Production Capacity: 50 week
• Delivery Time: 3-4 weeks
• Packaging Details: Wooden packing

Product Details:

As per IP 31 the apparatus Consists of Brass Sleeve and case with metal cup and a glass Boiling tube with Cork fitted to a bath 600 ml beaker is provided. The assembly is kept on heater with energy Regulator control and stand with F.H.P. elect Stirrer. As per IP 132 the unit Comprises a glass beaker with fiber Cover together with glass test tube with three indentations to receive Chromium plated brass cup cork for tube and a 1.5 mm diameter Brass rod. The assembly is kept on heater with energy regulator and stand with F.H.P. motor stirrer.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are the Leading exporter of Fully Automatic Bitumen Penetrometer for Transportation Engineering Laboratory.

Product Details:

For determination of softening point of bituminious materials according to IP 58 and IS 1205-1958. Softening point is that temperature at which the speciman under test becomes soft enough to allow a steel ball of specific dimensions to fall a required distance under test condition. The apparatus consists of glass beaker, ring Stand, two steel balls with rings and ball guides, hand Stirrer.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

As per IP 49, 50 & 167 specifications and also per is 1448 (p: 60) & (p: 93) this apparatus is used for penetration test on a wide variety of materials. It consists of a head support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of needle tip to sample and in corporate a slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter sub-division. The instrument is supplied with two sample containers & 2 wts. Penetrometer apparatus with containers and weights having penetration needle (Bitumen)
Penetrometer apparatus with containers and weights having penetration CONE HOLLOW type (Grease) same as above – but with Geared arrangement for moving the arm with geared unit. Penetrometer with Brass Cone & Needle with DIGITAL TIMER Device (Adjustable).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Kinematic Viscosity Bath AS PER (IP71) for the temperature of 40 degree and 100 degree and also refrigerated upto -35 degree C.:Kinematic viscosity Bath as per ASTM with temp. Range room temp. to 150 deg C along with temp. accuracy +/- 0.1 degree centigrade to accommodate 5 viscometer at a time along with Viscometer holder. It consist illumination facility for better visibility. The stirrer is for better uniformity throughout the chamber. Temp. controlled by thyristor drive temp. indicator cum controller.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: JNPT
• Production Capacity: 10 week
• Delivery Time: 3-4 weeks
• Packaging Details: Wooden Packing

Product Details:

We provide Petroleum Testing Equipment to our clients 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This apparatus is suitable for determining the close cup flash point of petroleum and mixtures according to IP 33 and IP 170 and also IS 1448 (Part I) 1985 (P:20). It is suitable for oilswhose flashes below 700 C. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220 Volts AC Circuits.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80C as per specification IP 36 and IS: 1448 (P: 69) 1969. The apparatus consists of a cup, heating plate to spectificdimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for aperation on 220 Volts 50 cycles AC Circuits.
GT 132 Cleaveland flash point & fire point Apparatus Electrical Heating with Energy Regulator Gas Test Jet GT- With oil wick Arrangement
GT 134 - Same as above with - Gas Jet & Oil Wick Arragement Combined Model RAP 135 Cleaveland flash & fire point Apparatus voltage Variac (Copper Coil) Combine Model GT 136 — Same as above — With Digital Temp, Indicator .

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

It is used for determination of calorific value of liquid & Solid fuels.The Instrument consists S.S. Body made out of corrosion resisting stainless steel Rod cap. 300 ml, Calorimeter vessel, outer Jacket with insulated Body, offset stirrer, S.S. Crucible, pellet press, ignition wire, pressure gauge, with flexible pipes. with electronic firing unit.

Product Details:

It is made as per IP 14, ASTM 524 and IS 1448 (P:8)- 1967 Standards. It is used to determine the amount of carbon deposit when oil evaporated under specified condition. The apparatus consists of a solid metal bath having 5 wells to accommodate cocking bulbs, the heavy duty heating elements provided around the bath. Supplied with 5 cocking bulbs, and one syringe.

• Rams bottom Carbon Residue Apparatus with temp. regulation by energy Regulator,thermocouple and Digital Temp. Indicator in separate cabinet

• Rams bottom Solid state Electronic digital temperature controller PID type in separate unit

• OPTIONAL ACCESSORIES

• Spare Cocking bulb
• Spare heating element for above
• Spare syringe
• Stainless Steel Tong

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Aniline point apparatus as per IP 2 & IS 1448 (P-3), ASTM D 611 method A complete with jaket (without thermometer)

Additional Information:

• Item Code: BT-08
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: JNPT PORT
• Production Capacity: 50 /month
• Delivery Time: 3-4 weeks
• Packaging Details: Wooden Packing