Concrete Testing Equipments

Product Details:

We are dealing in Plastic Cube Mould .

Plastic cube mould (or Cube Mold) can be supplied in different models, each one with different characteristics and weight. All the cube moulds have a reinforced band on the walls, and the inside surfaces is very smoothed getting easier the specimen's ejection. It grant an additional resistance, and foresee a "X" reinforced  band on the base, improving the strength of the mould, and allowing the user to give small blows with a rubber heated hammer by easing the specimen's ejection

Product Details:

U Box Test on Self Compacting Concrete for Workability is used to measure the filing ability of self-compacting concrete. The apparatus consists of a vessel that is divided by a middle wall into two compartments; an opening with a sliding gate is fitted between the two sections.

Product Details:

V Funnel is one of the apparatus of the SCC (self consolidating concrete) test accessories. These tests are used to determine the flowability and passing ability of self consolidating concrete (SCC).

Product Details:

The J-Ring Test is used for determining the passing ability of self-consolidation concrete. Exept J ring, the apparatus can be used for performing the slump-flow test.

Product Details:

We are Manufacturer and exporter of Slump Test Apparatus from India Mumbai. It comprises of slump cone (Top dia 100mm, Bottom dia 200mm & Height 300mm) with handles made of mild steel sheet, a chrome plated graduated tamping rod 16mm dia x 600mm long, rounded at one end and a hexagonal base plate. It is use to measure slump value of concrete and cement.

Additional Information:

• Item Code: CT-01
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: JNPT
• Production Capacity: 10 week
• Delivery Time: Ready in Stock
• Packaging Details: Export Worthy

Product Details:

Compaction Factor Apparatus as per IS:5515

Compaction factor is the ratio of the weight of partially compacted concrete to the weight of the concrete when fully compacted in the same mould. The weight of partially compacted concrete in relation to its fully compacted state is a reasonably good indication of the workability of concrete.

Additional Information:

• Item Code: CTE-03
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This machine is quite useful on field Laboratories or mobile testing laboratories or Vans which frequently change site or location. It is particularly useful where constant and consistent Electric power is not available. The load is applied manually and observed on a Pressure gauge. The Pressure Gauge has maximum load indicator which stand still even after the specimen under test crushes and has to be set to zero manually.

Additional Information:

• Port of Dispatch: JNPT
• Production Capacity: 10Week
• Delivery Time: 2-3 weeks
• Packaging Details: Heavy Wooven Packaging

Product Details:

The slump cone having dimension as (ID-100mm at top ID- 200mm at bottom & length 300mm) is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of the concrete is levelled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.Slump Test Apparatus is with testing rod & base plate.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are manufacturer, supplier and exporter of Concrete testing Equipment From India, Mumbai. In Civil Engineering it is very essential to test the cement and concrete . We provide complete solution to our client from new start to establish fully equip lab. Our range is already mention. Some of hot product ISI cube Mould, Compression Testing Machine, Slump Cone, Vicat Needle Apparatus, Concrete Mixer, Test Sieves etc.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Globetrek Cube Testing Machine is used for compression test on Concrete Cubes . This machins can be manufactured in 3 different Models ( Channel , Pillar and Plate ) 

Above mentioned price is for Globetrek Cube Testing Machine Channel Type with electric Cum hand operated- Capacity 2000kN 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

The Point Load Test Apparatus was originally developed bythe Imperial College, London that comprises fixed columnloading frame. This is a portable instrument used for theclassification of rock by mean of uni-axial compressive forceloading over test sample. Also used for the testing ofdifferent shapes and sizes such as rock core samples andconcrete specimens.

Additional Information:

• Item Code: ST-23
• Port of Dispatch: Mumbai
• Production Capacity: 100/Month
• Delivery Time: 3-4 weeks
• Packaging Details: Export worthy wooden packing

Product Details:

Globetrek Engineering Corporation is manufacturer, supplier & exporters of Concrete Permeability Apparatus from Mumbai, India.
Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory.

Specification:

• The concrete permeability apparatus comprises of a brass/gunmetal cell of Square/Round cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections.
• The cell assembly consists of one base plate, one metal funnel and one top plate.
• The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15kg/cm sq.
• Gauge is for indicating the pressure in the cell.
• A foot pump and a pressure tube is supplied to develop pressure in the chamber.
• The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity to water. Pressure can also be applied by a pressure air line or by a compressor which can be supplied at an extra cost.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

The Point Load Test Apparatus was originally developed by the Imperial College, London that comprises fixed column loading frame. This is a portable instrument used for the classification of rock by mean of uni-axial compressive for celoading over test sample. Also used for the testing of different shapes and sizes such as rock core samples and concrete specimens.

Product Details:

The Flexure Strength Testing Machines are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is provided for testing different size of beams. The load is indicated on a calibrated bourdon tube type load gauge of range : 0 -100kNx0.5kN The load gauge is calibrated against National Physical Laboratory I National Council for Cement and Building Materials certified proving ring

Product Details:

Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0. 8 to 2. 7. It has a stainless steel bam calibrated specific gravities from 0. 8 to 2. 7. A stainless steel cup with lid and overflow vent is fitted on one side of the beam. A counter weights with cursor slides over the graduated scale. The beam has a knife-edge at centre which rests in a fulcrum fitted in the stand. Leveling screws and spirit level are fitted to the stand. Supplied complete with wooden box.

Product Details:

Lab. Concrete Mixer Pan Type 40 Ltr Capacity FullyPowder Coated The mixing is done by rotating drum on its axis whereas the paddle or the rod remains stationary on its axis.The paddle or rod is fixed to the cover which isprovided with a locking screw for closing the drumwhile mixing. The mixer has been provided with a tiltingtype mechanism with the help of a hand wheel. Themixer is provided with rubber wheels, which makes iteasy to carry.Pan Size 24 Dia.Pan Depth 14BottomPlate Thickness : 10mm.Side Wall Plate Thickness : 4mm.Pan Rotation Speed - 22-24rpm.Discharge ArrangementDrum Tilting Arrangement.Motor 2HP, 960rpm, 3 Phase.Gear Box 2 Stage, Reduction Gear Box.Most Suitable for the material 6 Moulds of 150mm

Product Details:

made of mild steel, powder coated or spray painted

Product Details:

Tile Abrasion Testing Machine is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. the machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions.

Additional Information:

• Item Code: CTE-06
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are manufacturers, suppliers and exporters of Cylindrical Moulds. We are engaged in offering our valued clients a quality assured range of Cylindrical Moulds, which are extensively used for testing concrete cylinders for compressive strength tests. Additionally, these moulds are split vertically into two parts.The mean internal diameter is within 0.2mm and height is within 1mm. The ends are machined to 0.05. The base plate and top plate are machined flat to 0.03mm.

Our clients can avail these moulds in various sizes at leading market prices:

• Cylindrical Moulds available in sizes of: 150mm dia. x 300mm high
• Cylindrical Moulds available in sizes of: 100mm dia. x 200mm high
• Cylindrical Moulds available in sizes of: 300mm dia. X 600mm high.

Additional Information:

• Item Code: CTE-20
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are manufacturer & supplier of Vee Bee Consistometer from India, Mumbai. The instrument comprises of a slump cone with a hopper, specimen container, a transparent plastic plate attached to a graduated rod, mounted on a vibrating table, and a tamping rod 16mm dia. x 600mm long. The vibrating table has fixed amplitude and frequency of vibration, imparted by a motor drive mechanism.

Procedure:

• A conventional slump test is performed, placing the slump cone inside the cylindrical part of the consistometer.
• The glass disc attached to the swivel arm is turned and placed on the top of the concrete in the pot.
• The electrical vibrator is switched on and a stop-watch is started, simultaneously.
• Vibration is continued till the conical shape of the concrete disappears and the concrete assumes a cylindrical shape.
• When the concrete fully assumes a cylindrical shape, the stop-watch is switched off immediately. The time is noted.The consistency of the concrete should be expressed in VB-degrees, which is equal to the time in seconds recorded above.

Additional Information:

• Item Code: CTE-23
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: JNPT Nhavasheva
• Delivery Time: 3-4 weeks
• Packaging Details: Wooden

Product Details:

We are manufacturer supplier of Lateral Extensometer.

Specifications:

• The unit consists of two movable frames pivoted at one end.
• The extensometer is fixed to the specimen with the help of tightening screws.
• The lateral extension is indicated on a dial gauge of 0. 002mm x 12mm travel.
• The extension is magnified 2. 5 times and the dial gauge readings are to be divided by 2. 5 to get the exact readings.
• A spacer strip is provided to initially set the dial gauge, and can be removed after initial setting.
• Supplied in a wooden carrying case.

Additional Information:

• Item Code: CTE-16
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This operation is used for determining setting time of hydraulic cement. It consists of a base with a vertical shaft and two horizontal arms, the lower arm being adjustable for height. Supplied complete with one initial needle, one final needle and a glass base plate.

Product Details:

Additionally, available in various customized options, these moulds are manufactured with finest quality raw materials with a base plate. We offer these Beam Moulds at leading market prices.

Available in sizes:

• 100 x 100 x 500mm
• 150 x 150 x 700mm

Additional Information:

• Item Code: CTE-11
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Ref. Standard - IS: 1199, AASHTO T126

 

The Flow Table top is 76.2 cm dia, finely machined from a solid brass casting. The integrally cast ribs are designed for support and strength. The stand is fabricated of cast iron and is of sturdy construction. Holes for mounting on foundations are drilled in the base plate. The ground and hardened steel cam is designed to drop the table by 12.5 mm with an electric geared motor. Complete with Flow mould 250mm base dia, 170mm top dia and 120mm high. The new design has better aesthetics and compact look. suitable for operation with 220 volts, 50 Hz, single phase, AC Supply.

Additional Information:

• Item Code: CTE-08
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 10/Week
• Delivery Time: 1-3 weeks
• Packaging Details: Wooden Box

Product Details:

We are manufacturer supplier & Exporter of Air Entertainment Meter from India, Mumbai.

Air Entrainment Meter has been fabricated in accordance with IS: 1199. We are one of the leading Manufacturers and Suppliers of the Air Entrainment Meter in India. This Air Entrainment Meter is used for the determination of air content of freshly made concrete. Air Entrainment Meter comprises of a pressure tight flanged cylindrical measuring bowl, attached with a conical cover assembly having a seal in-between and changeable flanged. The conical cover consists of an air valve and a pet cock ideal for bleeding-off the water. A graduated cylindrical stand pipe is fixed on the conical cover assembly. Needed pressure is put to the specimen by the help of a pressure bulb. The complete assembly is mounted on a flat base.

Capacities Available:

• 0.005 cubic meter
• 0.007 cubic meter
• 0.01 cubic meter

Additional Information:

• Item Code: CTE-09
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are manufacturer & supplier of Longitudinal Compressometer. It is designed for finding out the deformation and strains on 15cms. Diameter and 30 cms. High cement concrete cylinders when subjected to compressive loads.

Specifications:

• Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder.
• A dial gauge 0.002mm x 12mm is mounted on the upper ring and the tip of the dial gauge rests on an anvil.
• The zero on the dial gauge can be set by adjusting the anvil screw.
• Supplied in a wooden carrying case.

Additional Information:

• Item Code: CTE-17
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Used for determining the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate.

Specifications:

• The equipment comprises of -A conical metal mould 1.5 inch at the top, 3.5 inch dia at the base and 2.7/8 inch in height.
• A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter.

Additional Information:

• Item Code: CTE-19
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are manufacturer,supplier & exporter of Tile Flexure Testing Machine. This is a double lever loading machine and the load is applied by flow of lead metal which automatically stops when the sample breaks.

Additional Information:

• Item Code: CTE-21
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Globetrek Engineering Corporation is manufacturer, supplier & exporters of Concrete Mixer - Laboratory Typr from India, Mumbai.

A concrete mixer is a device that homogeneously combines cement, aggregate such as sand or gravel, and water to form concrete. The mixer uses a revolving drum to mix the components. Uniform and thoroughly mixed batches can be produced in field or Laboratory. Inevitable for Mix design formulation. The Concrete Mixers are available in two versions for Laboratory or field use. The field models are hand operated. This portable concrete mixer has rubber tyred wheelsand a towing tongue so that it can be towed and moved around by hand. Its rotationis powered by single-phase electric motor or by hand . The lever allows the concrete to be tipped into a wheel-barrowor mixing pan. The driving shaft is mounted on sealed ball bearing The counter balanced drum swivels and tilt 360° for easy and complete discharge. Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1. 1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with ½H.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are one of the leading firms, engaged in manufacturing, supplying and exporting qualitative Dorry Abrasion Testing Machine. All the machines are widely demanded by ceramic tile making industry for different tests and checks and other applications. These machines are available in various models and sizes as well as can be customized as per the demands and needs of customers.

Specification:

• It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 r.p.m. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are manufacturer & supplier of Jolting Apparatus.

Specifications:

• The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800mm from the centre of the table.
• There is a projecting lug with a plane face on the lower face of the table beneath which is a stop with a rounded upper surface.
• The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gear box through a V-belt and pulleys.
• The cam rotates at a rate of 60 rev./min.
• A stroke counter fitted with micro-switch is provided which stops the machine after 60 jolts.
• Locating pins are provided for mounting the mould compartments on the table.
• The mould surmounted by the hopper can be clamped rigidly to the table.
• Supplied complete with mould and hopper.

Additional Information:

• Item Code: CTE-14
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Globetrek Engineering Corporation is manufacturer, supplier & exporters of Length Comparator from India, Mumbai.

It is used to measure the drying shrinkage of autoclaved portland cement and potential expansive reactivity of Cement aggregate combinations in mortar bars during storage on self-drying.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

The vibrating table is used for compacting concrete cubes and cylinders.

Specifications:

• It is designed to carry a load of 140 kg.
• The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet.
• The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top.
• The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration.
• A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table.
• The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations down to 2600 vibrations per minute.
• A speed regulation handle is provided for increasing or decreasing the frequency.
• A switch is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.supply.

Note:

• Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available.

Additional Information:

• Item Code: CT-06

Product Details:

We provide Briquette Mould to our users.

Product Details:

We are dealing in PVC concrete Test Cube Mould with size 150 x 150 x 150 mm and weight 1.4kg each mould