Aggregate Testing Equipments

Product Details:

Aggregate crushing value apparatus is used for measuring of resistance of aggregate to crushing.

Specification:

• consists of m.S.Cylindrical container 150 mm ±0.5mm dia x 130mm to 140mm high with base plate 200 to 230 mm./SGR x 6mm thick.

• A plinger of 148mm ± 0.5mm dia x 100 to 115mm high.
• Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded.
• And 1 no. Metal measure 115 ± 0.5mm dia x 180 0.5mm high.

Additional Information:

• Item Code: MT-04
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 100/Month
• Delivery Time: 2-3 Weeks
• Packaging Details: Export Packaging

Product Details:

Riffle sample dividers are used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 100/Month
• Delivery Time: 2-3 week
• Packaging Details: Wooden Packing

Product Details:

Riffle Boxes which as also called as Riffle Sample Divider is manufactured from heavy-gauge metal sheet .

Ref. Standards: IS:1607-1977, 2720, ASTM C 136, 0421 , D422, D427, D4517, 0452, 0457, D806, D4318, BS: 812 (Part 103), 1377, AASHTO T27, T87.

rapid collection of true representative samples from aggregate is one of the toughest Job , If you try to do it by manual process then it will take lots of time . Therefor in All laboratories prefer  Riffle sample divider . This Riffle Dividers looks like boxes and it consists of a metal box fitted with a series of chutes of equal width with fine finishing which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flow of the material. Supplied complete with two containers and filling scoop .

Globetrek Engineering Corp. has been exporting these Riffle Boxes ( Sample Splitter ) to various mines from Zambia , Rwanda , Uganda , Africa etc .

Product Details:

We are manufacturer supplier of Buoyancy Balance which helps in determining the specific gravity and for the water absorption of the aggregate. It is fitted with the 15 kg capacity x 0.5 gm of the electronic balance.

The frame is supplied with:

• Water tank,
• Suspension hook
• Lever for lifting the water tank manually

Additional Information:

• Item Code: MT05

Product Details:

Aggregates which are flaky and/or elongated will often lower the work ability of a concrete mix and may also affect long term durability. In bituminous mixtures, flaky aggregates make for a harsh mix and may also crack and break up during compacting by rolling. The flakiness of aggregate is determined by measuring the thickness of individual particles. Hence we offer thickness gauge and length gauge to check flakiness and elongation index of the aggregate respectively.

Additional Information:

• Port of Dispatch: Mumbai
• Production Capacity: 1000Month
• Delivery Time: 2-3 Weeks
• Packaging Details: Export Packaging

Product Details:

Ref. Standard - IS:2386 (Part IV) The Devals Abrasion Testing Machine, is used to determine the aggregate abrasion value of coarse aggregates as described in IS: 2386 (Part 4). The machine consists of two hollow cylinders, closed at one end and provided with tight fitting covers at the other end, mounted on a shaft at an angle of 30° to the axis of rotation. The shaft rotates at 30-33 r.p.m. through a reduction gearbox, coupled to a motor. Supplied complete with a revolution counter but without abrasive charge.

Product Details:

We are manufacturer exporter of Laboratory Pulveriser Laboratory pulveriser is used in laboratories is a disc kind of a crusher that grinds any kind of substance to make well crush sample in a single working. Chemical and geological laboratories make use of laboratory pulveriser. They are extensively used to examine, mining, and collective processing activities. The disc mechanism fitted in the laboratory pulveriser enhances smooth working of the device with less wear and tear of its parts. We manufacture high quality efficient laboratory pulveriser suitable for use in both chemical and industrial sectors.

Some of the features of our laboratory pulveriser are:

• Capable of compressing half a kg of quartz in 100 mesh in one minute
• Made using latest technology which makes them easy to operate, modern and reliable to give accurate results

Product Details:

We are Manufacturer Exporter of Length gauge. Used for determining the elongation index of aggregates. Aggregates particles are considered elongated when their length is more than 1.8 of their nominal size. Wooden base, brass plate and steel pins.

Specifications:

• Dimensions: 360x75x71 mm
• Weight approx.: 1 kg

Product Details:

Aggregate Impact Testing Apparatus developed as per IS: 2386 (Part IV). 

Specifications:

• Major Components
• A base and support columns to form a rigid frame work
• The quick release triggers mechanism to ensure an effective free fall of hammer during test.
• A cylindrical cup
• A metal measure 75 mm inner dia x 50 mm deep
• A tamping rod
• A blow counter.

Additional Information:

• Item Code: MT-01
• Port of Dispatch: Mumbai
• Production Capacity: 50/Month
• Delivery Time: 2-3 weeks
• Packaging Details: Wooden Box Packaging

Product Details:

Los Angeles Abrasion Testing Machine has been designed as per IS: 10070. This Abrasion Testing Machine is used for the determination of the resistance to wear of crushed rocks and small size aggregates.

Machine Components:
The machine comprises a hollow cylinder that is mounted on a robust frame on ball bearings. A detachable shelf that spreads throughout the inner length of the drum catches the abrasive charge without allowing it to fall on the cover. The drum is revolved at a speed of 30-33 RPM through an electric motor by a heavy duty reduction gear. Motor is apt for operation on 3 phase, 440 volts, and A.C. supply. The unit is offered with a tray for accumulation of the material with abrasive charge. It is also offered with 12 nos. hardened steel balls (Abrasive Charge) of 48mm dia.

Additional Information:

• Item Code: MT01
• Port of Dispatch: JNPT
• Production Capacity: 10/Month
• Delivery Time: 3-4 Weeks
• Packaging Details: Wooden Packaging